I-Night Vision Monocular ene-Infrared Digital HD Rifle Scopes yesithombe esifakiwe sangaphandle sezempi

I-Night Vision Monocular ene-Infrared Digital HD Rifle Scopes for Military Outdoor

Imodeli: DT-NS8X4

Incazelo emfushane:

I-DT-NS8X4 isebenzisa isiqinisekisi sesithombe sesizukulwane sesibili esiphezulu esisebenza kahle kakhulu, esithuthukisa kakhulu ukucaca kokubuka futhi esingahlukanisa okuqondiwe kosayizi wabadala ebangeni elingu-1-2KM.

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Imininingwane Yomkhiqizo

I-DT-NS8X4 Night Vision Monocular sighting inomsebenzi wokuvikela ukukhanya okuzenzakalelayo okulwa namandla, okulungele kakhulu ukusebenza kwangaphandle.Isibhamu sifakwe isinxephezelo sokukhanya kwe-infrared esizimele futhi esilawulekayo, esingahlangabezana nezimo ezihlukene zokusebenza kwebutho kanye namaphoyisa.

1. Idizayini yinhle kakhulu, isilinganiso sikhulu, ivolumu incane, isisindo silula, ukuqina kuphezulu.

2. Lwela ukwakheka komthelela wamandla aphezulu;wonke amandla athintana ubuso nobuso, amandla angaphezulu, ukuqinisekisa ukuqina komkhiqizo.

3. Idizayini ehlukanisayo neyokulungisa yamukela idizayini elungisa ngokushesha futhi evala ngokushesha, eguquguqukayo ekusebenzeni futhi elula ukuyisebenzisa.

4. I-anti-exposure eye mask design, ukuqinisekisa ukuthi ukusetshenziswa kwendawo yasebusuku akuvezi izinhloso zabo.

Ukucaciswa Komkhiqizo

INDLELA	I-DT-NS84
IIT	Gen2+/Gen3
Ukukhuliswa	4X
Ukulungiswa ( lp/mm)	45-57
Ukuzwela kokutholwa(M）	1500
Hlukanisa ibanga(M）	1000
Ilensiuhlelo	F1: 1.4, F85mm
Imbobo	55 mm
I-FOV(iziqu）	11.5
Ibanga lomfundi	50mm
Uhlobo lokuthweswa iziqu	Ikhesa ebomvu Ekhanyayo Emuva
Ubuncane be-mil	1/6 MOA
Ibanga le-Diopter	+/-5
Ibhethriuhlobo	CR123(A)x1
Impilo yebhethri(H）	40-50
Ibangayokugxila(M）	8--∞
IsebenzaIzinga lokushisa (℃）	-40 /+60
Umswakama ohlobene	5%-98%
Ukumelana nomthelela	> 1000G
Isilinganiso sendawo	IP65(IP67ngokuzikhethela）
Ubukhulu(mm）	257x92x90
Isisindo(alikho ibhethri）	850g

1.Ukufakwa kwebhethri

Zungezisa ikhava yebhethri ngokuphambene newashi, khipha ikhava yebhethri (njengoba kukhonjisiwe emfanekisweni ① - 1), faka isigxobo esisodwa sebhethri esingu-CR123 kukhathriji yebhethri, bese uqondanisa isigxobo esinegethivu sekhava yebhethri nesigxobo esinegethivu sebhethri sekhatriji yebhethri. (njengoba kukhonjisiwe emfanekisweni ① - 2).

2.Ukulungisa

Inathi lokukhiya le-digital aiming fixing clamp lisontekile ngokuphambene newashi, futhi indawo ye-fixing clamp ye-digital aiming clamp ihambisana nesitimela somhlahlandlela.

Iphansi le-clamping groove ye-clamp yokulungisa linamathele phezulu kwesitimela somhlahlandlela we-pickup.

Inathi lokukhiya le-clamping fixture liqiniswa ngokwewashi ukuze kuqedelwe ukufakwa kwedivayisi okuhloswe ngayo.

3.Vuliwe ukulungiselelwa

Njengoba kuboniswe ku-Fig. 3, Vula iswishi yomsebenzi

ngokulandela iwashi.

I-knob ikhombisa indawo ethi "ON",

lapho uhlelo luqala ukusebenza.

4. Ukulungiswa kwe-eyepiece

Khetha ithagethi enokukhanya okumaphakathi.I-eyepiece ilungisiweNgaphandle kokuvula ikhava yelensi.Njengomfanekiso wesi-4, Vula i-eyepieceisondo lesandla ngokwewashi noma ngokuphambene newashi.Ukufanisa i-eyepiece,lapho isithombe esiqondiwe esicace kakhulu singabonwa ngeso,Ukulungiswa kwe-eyepiece kuqedile.Abasebenzisi abahlukene badinga ukulungisa ngokuvumelana nombono wabo.

5. ukulungiswa kwelensi yenhloso

Ukulungiswa kwenhloso kuyadingeka ukuze ubone okuqondiwe emabangeni ahlukene.Ngaphambi kokulungisa i-lens, kufanele ulungise i-eyepiece ngendlela engenhla.Lapho ulungisa ilensi yenhloso, khetha ithagethi yendawo emnyama.Njengoba kukhonjisiwe kuMfanekiso 5,Vula ikhava yelensi bese uqondisa kulokho okuhlosiwe.Guqula isondo lesandla eligxilile liye njengewashi noma ngokuphambene newashi.Kuze kube yilapho ubona isithombe esicace kakhulukokuhlosiwe, qedela ukulungiswa kwelensi yenhloso.Lapho ubheka okuqondiwe emabangeni ahlukene, inhloso idinga ukulungiswa futhi ngokwendlela engenhla.